Ranger Series Handhelds

Durable and well-equipped for any challenge across multiple industries.

This device is Long Range ready. Find out more >

Up to twenty-one buttons of control.

The Ranger allowed 12 custom functions, and the Super Ranger up to 21, including Emergency Stop capability. The tough polymer enclosure makes this handheld durable and well-equipped for any challenge.

The ability to control the crane or other industrial equipment from outside of the cab eliminates the need for most 2-man teams. The operator has the freedom to move around the work site, controlling the vehicle with precision and accuracy from a safe distance while getting the best vantage point.

  • 300 hour continuous use rechargeable battery, with low battery indicator

  • Receiver output can be selectively interlocked to other operations for safety reasons

  • Optional external receiver antenna extends range from 100 ft. to up to 1000 ft.

  • Modular components and an external set-up button on the receiver allow for easy installation and field replacement

  • Transmitter and receiver units operate on a 56-bit digital code, eliminating accidental operation

Example Modes of Operation

MOMENTARY

While button is pressed, channel is active. When button is released, channel is deactivated. If communication is lost with handheld for more than 500 milliseconds, the channel will deactivate.

LATCHED

When the button is pressed, the channel will turn on and remain on after the button is released. The next button press will then turn off the channel. If the receiver is setup with Safelink, the channel will turn off when the Safelink timer expires.

EMERGENCY LATCHED

When the button is pressed, the channel will activate or deactivate and remain in this state until the receiver power is reset. E-Stop will remain latched even if the Safelink timer expires.

QUERY

The channel will activate after 5 minutes if the ‘QUERY’ button is not pressed. After the first 4.5 minutes, the alarm will sound for the remaining 30 seconds. If there is a Query Enable channel set up, the Query timer will not run unless the enabled channel (PTO, for example) is first turned on.

ENABLE

Used in association with other operations where the Enable button must be pressed first. After the Enable button is pressed, the other associated channel button can then be pressed for the desired operation (available with Momentary or Latched operations).

TIME DELAY

Associated with a latched channel. When a latched channel is activated after a specified time, the Time delay channel will automatically activate. The Time Delay channel will turn off when the associated channel is turn off.

Two options. Incredible control.

Super Ranger with 21 buttons of operation.

Ranger with 12 buttons of operation.

 Ready to get started?

Our in house experts are available to discuss and assess your system needs in order to provide the best solution for your business.